fechar

Está a utilizar um browser antigo. Para ver este site correctamente, escolha uma das seguintes actualizações:
Usted está utilizando un navegador antiguo. Para ver correctamente este sitio, elija una de las siguientes actualizaciones:
You are using an older browser. To view this site properly, choose one of the following updates:


Não voltar a exibir esta mensagem / No volver a mostrar este mensaje / Do not show this message again
 
You are here: Home > Products and services > ... > Lubricants for the Industry > Lubricants for the Industry
  • EN
     
close
share
 
close
 
close
 

 Lubricants for the Industry 

Galp Energia offers a wide variety of lubricants, specially developed in response to the multiple needs of the industry, that serve as excellence reference for this sector.

The reduction of production costs of your business is a priority to us. We use technology and research in order to develop better lubricants and optimize their performance.

 

Galp Energia leads the Portuguese market with an extensive catalogue of solutions, adapted to the specific requirements of the industry sector. Every day, we put at your service the knowledge of our technical team to ensure you the best results.

Hydraulic fluidsHydraulic fluidsLubricants with high thermal and hydrolytic stability, resistant to oxidation, that were developed taking into consideration the new hydraulic systems requirements.  
Closed gearsClosed gearsThese gears are used for power transmission between two points in the production of work. Proper lubrication is essential for the correct functioning of the system.  
Open gears, cables and chainsOpen gears, cables and chainsOpen gears, cables and chains are used to transmit forces in motion. This type of lubricant should have high adhesion, resistance to water and solar radiation, as sometimes the equipment is exposed to different weather conditions.  
Air compressorsAir compressorsThese compressors raise the static pressure of air, which increases the temperature, since the work transmitted is transformed into heat. The internal lubrication is essential for a good compression performance and a safe operation. Choose the thickness level and parameters appropriate for the range of temperature generated by the equipment.  
Refrigeration compressorsRefrigeration compressorsThe objective of a refrigeration system is to cool the temperature. Depending on the compressor, the lubricant may or may not come in contact with the refrigerant.  
Alimentary rangeAlimentary rangeLubricants used in the maintenance of equipment for the food industry need to meet strict criteria. They are produced only with materials contained in the "White Book of Proprietary Substances and Nonfood Compounds", under procedures established by the NSF, National Sanitation Foundation.  
Turbines and circulation systemsTurbines and circulation systemsThe quality of bases and additives used in the lubrication of turbines is essential for their good performance. Galp TURBINOIL product line is suitable for steam turbines, gas and hydraulic, as well as for hydraulic equipment, circulation systems, and some air compressors.  
Release Agent productsRelease Agent productsSpecially developed for application within construction lines and facilitate the parts separation process. Lubricants should reduce friction, without affecting the pieces, without spotting or leaving residues in the mould.  
Cutting oilsCutting oilsThe cutting process puts two solids in contact, the tool and the piece, developing high levels of friction, high temperatures and tool wear. The cutting fluids are used to improve the conditions of operation, the finish and extend the longevity of the tools. Can be found in soluble or whole.  
White oils and petrolatumsWhite oils and petrolatumsTechnical oils are widely used in lubrication of textile machinery, cosmetics and insecticides for horticultural purposes. Medicinal oils have pharmaceutical ends and machinery and also serve as lubrications for food industry equipment.  
Guides and slide barsGuides and slide barsThe purpose of a machine tool is to manipulate metals in order to obtain parts, with the help of tools under predetermined conditions. Lubricants for guides and slide bars are designed to reduce the guide’s erratic movements, which may arise in the process, by providing the film of lubrication between the moving parts.  
Pneumatic toolsPneumatic toolsPneumatic tools convert the forces of compression and expansion of air into mechanical work. The choice of the adequate lubricant should take into account its viscosity, antirust power, adhesiveness and hydro escape action on metal surfaces, of which extracts the water in the form of emulsion.  
Heat treatmentsHeat treatmentsHeat treatment consists of submitting the steels to heating and cooling processes, in order to modify their mechanical properties. The parts are cooled through their complete immersion in oil, which acts as coolant.  
Transformers and breakersTransformers and breakersUsed oils to isolate and cool the coils of transformers while maintaining high voltage and electric current in the premises. Good heat transfer is achieved by low viscosity and a low pour point. For the oil to have a high dielectric strength should be free of moisture and solids.  
GreasesGreasesIn some cases, liquid lubricants do not provide the necessary lubrication conditions. In these situations, we use greases, which have a thick paste and a higher sealant capacity. Their consistency, the type of thickener and pour point determines the quantity recommended for each application.  

About this product, we recommend that you see:

Market